Prep labels that wipe off in any water temperature in under 30 seconds. No peeling, no scraping, no sticky goop on every reusable lexan. Designed for the prep dish pit, the salamander station, and the walk-in. Print them straight from the BOH Wiz prep-list app on a Zebra ZD411 or any compatible direct-thermal Zebra you already own.
Most kitchens use one of three labeling systems. Two of them leave a mess. Here's what each one is actually doing on your containers.
Standard sticker labels with permanent acrylic adhesive. Cheap. Stick to anything. Also: leave glue residue when peeled, melt under hot water, and require scraping with a knife or steel wool. The reusable lexan starts looking like a 1980s motel mini-fridge after six months.
Lower-tack adhesive that peels off cleanly. Better than permanent, but: still need to be physically pulled off, often tear in half, and the adhesive transfers if a hot pan brushes against it. Solves the residue problem at the cost of an extra step in the dish pit.
Adhesive itself breaks down when wet. Drop the container in the soak sink, run it through the dishwasher, hit it with the spray nozzle. Label dissolves in under 30 seconds in any water temperature. The container comes out clean. No peeling step at all.
$129.99 per pack. Two rolls. 4,672 labels total. About 2.8¢ per label.
Standard prep size (2 inches by 1 inch). Big enough to read at arm's length when a deli quart is on the third shelf of the walk-in. Small enough to fit on the side of a 4-oz souffle cup without wrapping. The label material is matte white with a smooth print surface — direct-thermal printing produces clean, dark text that doesn't smudge under cooler humidity.
The adhesive holds through normal refrigeration, freezer storage (down to about -10°F), and the casual splash of a moving prep line. It only releases when it gets sustained water contact: a few seconds in the sink, a wash cycle, or a deliberate spray.
Order a PackBOH Wiz dissolvable labels are designed for the BOH Wiz prep-list app. Tap any item in the prep list, the label prints with the right name, prep date, and expiration baked in. No re-typing into a separate label app. The app is free, the integration is free, the labels are the only consumable.
Yes. Commercial dish machines are exactly the conditions these labels were designed for: hot water, soap, recirculating spray. The label dissolves before the rinse cycle finishes. No pre-soak, no scraping needed.
Yes. Material and adhesive are both FDA-compliant for indirect food contact, the standard for prep storage. The dissolved adhesive is rinsed out with the wash water, not transferred to food.
Yes, down to about -10°F. The adhesive locks tighter at freezer temps. Defrosting brings the label back to normal — it'll still dissolve cleanly when washed afterward.
If a hot lexan brushes against a labeled container above ~180°F, the label may start to brown and the adhesive may set harder. Same as any label material under direct heat. Use removable or permanent labels if you're labeling steam-table pans during service.
$129.99 for 4,672 labels. Ships free in the lower 48. Reorder when you run out, or set up auto-ship for the cadence that matches your kitchen's volume.
Order Labels See Full Pricing